General Information
Every installation has its own special requirements. Therefore we suggest that, before making a final decision, you talk with your Villager dealer who will be happy to help.
To ensure the highest standards, all these stoves are made from high quality steel plate and cast iron components that are sourced from carefully selected and monitored foundries.
One of the most important aspects in choosing a stove is making sure it provides the right level of heat output in relation to the room size. As a guide to help you work out how much heat you are likely to require, we suggest the following calculation formula:
Length x Width x Height of room = Space in cubic metres.
Space in cubic metres ÷ 14 = kW heat required.
A stove with a higher output can be used if it is to be run with a lower fuel level. With a little experimenting, you will quickly find the fuel loading that is right for your comfort. A small increase in the heat output may be required depending on the number of windows, doors and the level of insulation there is in the room.
Woodburning and Multifuel Models
Most woodburning and multifuel stoves can be run with the doors open or closed. To enjoy an open fire in safety we can provide a spark guard for most models, which is available as an optional extra. It is worth remembering that, with the doors closed, stoves can burn fuel up to 80% more efficiently than open fires, making them a very economical and fuel-efficient source of heat. Where a hot water boiler can be fitted, we have included the heat output capacity. More information on the provision of hot water and central heating can be found in the "Hot Water & Central Heating" section. A special multi-purpose stove operating tool is supplied as standard with all our stoves.
Note: Where the HETAS® logo is shown against an appliance this indicates that it has been approved as "Safe and Fit for Purpose". At this level HETAS® testing and approval does not cover heat output ratings. The kW ratings shown are maximum outputs, claimed from our own test work, by ourselves as manufacturers.
Hot Water and Central Heating
Most Villager wood and multifuel stoves can be fitted with an add-in boiler for heating hot water. Some models can be supplied with a factory fitted high output boiler to run. Always seek professional advice before making a final decision. The following tables list the Villager models and factory fitted or add-in boiler options available and the outputs to water for these.
